Industrial computer use environment and precautions - Solutions - Huaqiang Electronic Network

Single-chip microcontroller STM32L151CCU6

MOS power IC with full range of options

Mobile phone crystal: 3.2*2.5mm 3225, 26MHz (26.000MHz), 7.5PF, 10PPM, 20PPM, 30PPM

Factory direct sales – high-quality solid capacitors and aluminum electrolytic capacitors, ensuring top-tier quality straight from the factory.

1. When using the industrial computer, make sure the ambient temperature stays between 0°C and 55°C. 2. Keep the relative humidity within 5% to 95%, and avoid condensation in the surrounding environment. 3. Ensure the power supply voltage is between 200V and 240V AC for stable operation. 4. Avoid placing the industrial computer in areas with high humidity, extreme temperatures, vibrations, or dust. 5. The left-side opening and the rear heat dissipation port of the power supply are designed for ventilation. Never block or cover these areas to prevent overheating and ensure proper performance. 6. Maintain a distance of at least one meter from equipment like inverters or motors that may generate strong electromagnetic interference. 7. After turning on the industrial control machine, wait at least 8 seconds before using it. 8. To ensure reliable system operation, we strongly recommend not changing the BIOS settings on the motherboard without guidance. 9. When using the I/O interface of the industrial computer, avoid unplugging or plugging devices to prevent electrostatic damage. In case of unexpected power failure, disconnect the power immediately. Once the power grid stabilizes, reconnect the power. If power outages are frequent, consider using an appropriate UPS to maintain system stability. 10. Do not place the IPC on unstable or uneven surfaces to avoid potential damage.