Industrial computer use environment and precautions - Solutions - Huaqiang Electronic Network

Single-chip microcontroller STM32L151CCU6

MOS Power IC – Full Range of Options Available

Mobile Phone Crystal - 3.2 x 2.5mm, 3225, 26MHz (26.000MHz), 7.5PF, 10PPM, 20PPM, 30PPM

Factory Direct Sales - High-Quality Solid Capacitors and Aluminum Electrolytic Capacitors in Surface Mount Technology

1. When using the industrial computer, ensure that the ambient temperature is maintained between 0°C and 55°C for optimal performance. 2. Keep the surrounding relative humidity within 5% to 95%, and avoid environments where condensation may occur. 3. The power supply voltage should be stable and fall within the range of 200V to 240V AC. 4. To prolong the lifespan of your industrial computer, try to avoid placing it in areas with high humidity, extreme temperatures, vibrations, or dust. 5. The left-side panel and the rear heat dissipation port of the power supply are designed for ventilation. Make sure these openings remain unobstructed to prevent overheating and ensure smooth operation. 6. Maintain a distance of at least one meter from equipment such as inverters or motors that may generate strong electromagnetic interference. 7. After turning on the industrial control machine, allow it to run for more than 8 seconds before performing any further actions. 8. For reliable system operation, we strongly advise against modifying the BIOS settings unless necessary. 9. When using the I/O interface of the industrial computer, avoid unplugging or plugging in devices while it's powered on to prevent electrostatic discharge damage. In case of an unexpected power failure, disconnect the power immediately and wait until the power grid stabilizes before re-powering the system. If frequent power outages occur, consider using an uninterruptible power supply (UPS) to protect the system and ensure continuous operation. 10. Never place the IPC on an unstable surface to prevent accidental damage or malfunction.