In recent years, the field of flat panel displays has sparked considerable interest in multi-primary color technology. Specifically, the 3+3 multi-primary color display system—comprising red, green, blue, yellow, cyan, and magenta—has been widely discussed as a means to significantly expand the color gamut and reproduce more vivid and natural colors. The question then arises: can LED displays achieve this 3+3 multi-primary color configuration?
The answer lies in understanding how to balance the driving strength of the additional primary colors—yellow and cyan—without compromising other essential aspects of display performance. Three key principles guide this process:
1. When increasing color saturation, the color tone must remain consistent.
2. The purpose of adding yellow and cyan is to enhance the color gamut and increase saturation, but overall brightness should not be affected.
3. The adjustment should center around the D65 standard, ensuring that the boundaries of the RYGCB color gamut are linearly expanded within the acceptable range.
With these principles in mind, we can apply the gravity center law to develop a 3+2 multi-primary chromaticity processing method. However, achieving a true 3+2 full-color LED display requires overcoming challenges such as the limited brightness of yellow and cyan LEDs.
Moving on to color reproduction processing, the development of pure blue and pure green LEDs has led to widespread adoption of full-color LED displays due to their wide color gamut and high brightness. However, the chromaticity coordinates of red, green, and blue LEDs often deviate significantly from those of PAL TV standards (as shown in Table 1), resulting in poor color accuracy, especially when reproducing skin tones. This discrepancy has driven the development of color reproduction technologies.
Two effective methods have emerged:
1. Adjusting the color coordinates of the primary red, green, and blue LEDs to align more closely with those of the PAL television. While this greatly improves color reproduction, it also reduces the overall color gamut and saturates the image.
2. Correcting only the skin color gamut, which is most sensitive to human vision, while slightly reducing the saturation of less sensitive color areas. This approach helps maintain a balance between accurate color reproduction and vibrant image quality.
Lastly, chroma uniformity remains a significant challenge in LED displays. While brightness non-uniformity can be addressed through single-point calibration, chromaticity unevenness is more complex. It is generally believed that this issue can only be improved by subdividing and filtering the LED color coordinates, making it a critical aspect of display quality control.
High Current Terminal Blocks,Panel Terminal Block,Feed Through Terminal Block,Heavy Power Terminal Block
Sichuan Xinlian electronic science and technology Company , https://www.sztmlch.com