Camouflaged Telecom GSM Monopole Tower

Model NO.: PDBW-TS03
Condition: New
Transport Package: Polybag and Bundle
Specification: 10-50M
Origin: Zhejiang China
Model NO.: PDBW-TS03
Condition: New
Transport Package: Polybag and Bundle
Specification: 10-50M
Origin: Zhejiang China
Camouflaged Light Telecome GSM Monopole Tower is demanded in the city , where people has requirements in the radioactive and good looking .this type telecom monopole looks like lights pole, the Antenna is covered by fiber glass cover . it is made from mild sheet , after bending machine to bend similar round one , then welding by CNC welding machine including inner and external welding to connect . the tower height could be 10m-50m . each section length is about 10m-11.8m differing from the tower height . it could be the polygonal sides or almost round sides which is based on the design request . 


Height: 10-50M
Wind Pressure: 0-300 KM/H
Structure: Overlap Connection or internal flange connection
Material: Q345B/A572, minimum yield strength >=345MPA;
Details & Shape: Can be designed as per customer's requirement
Life span: 25 Years
Coat: Hot Dip Galvanization Minimum 120um
Painting : normally it is white painting outside
Delivery Time: 25 days after receiving down payment
Working & Resting Platform Quantity: 1-3 PCS
Antenna Support: 3-18 PCS
Microwave Dish: 3-18 PCS
Nuts& Bolts: Grade 8.8
Fiber glass cover: length as per whole tower height
Spare parts: All Necessary parts, e.g. Antenna Mount pole and Brackets , Climbing Steps, Safety
Guide Cable, Lightning Rod, Mounting bracket for Obstruction light, Holding down bolts/nuts, and
all other bolt and nuts required for erection and installation.
  Camouflaged Light Telecome GSM Monopole Tower is demanded in the city , where people has requirements in the radioactive and good looking .this type telecom monopole looks like lights pole, the antenna is covered by fiber glass cover . it is made from mild sheet , after bending machine to bend similar round one , then welding by CNC welding machine including inner and external welding to connect . the tower height could be 10m-50m . each section length is about 10m-11.8m differing from the tower height . it could be the polygonal sides or almost round sides which is based on the design request . 


Height: 10-50M
Wind Pressure: 0-300 KM/H
Structure: Overlap Connection or internal flange connection
Material: Q345B/A572, minimum yield strength >=345MPA;
Details & Shape: Can be designed as per customer's requirement
Life span: 25 Years
Coat: Hot Dip Galvanization Minimum 120um
Painting : normally it is white painting outside
Delivery Time: 25 days after receiving down payment
Working & Resting Platform Quantity: 1-3 PCS
Antenna Support: 3-18 PCS
Microwave Dish: 3-18 PCS
Nuts& Bolts: Grade 8.8
Fiber glass cover: length as per whole tower height
Spare parts: All Necessary parts, e.g. Antenna Mount pole and Brackets , Climbing Steps, Safety
Guide Cable, Lightning Rod, Mounting bracket for Obstruction light, Holding down bolts/nuts, and
all other bolt and nuts required for erection and installation.
 

SMA to IPEX/UFL Cable

Communication Cable,RF Connector,Coaxial Connector , RF Coaxial Cable Assemblies

Antenna, Communication Cable Co., Ltd. , http://www.nbantenna.com